Most Atlanta homeowners pay $4 to $5 per square foot to have a marble floor professionally ground and polished. Countertops and showers are priced as one flat job, starting at about $600.

Those are the prices we charge at Georgia Marble Services in 2026. They come from our own work in homes and businesses across Buckhead, Vinings and the rest of Metro Atlanta, not from a national average.

The rest of this guide shows what that money buys, what makes a price go up or down, and how to spot a quote that looks cheap but costs you more later.

Our 2026 Atlanta Prices at a Glance

Here is what we charge as of October 2026. These are real numbers from our own price list, so you can budget before you ever pick up the phone.

• Marble floors: $4 to $5 per square foot for grinding and polishing. Every marble floor we finish gets a professional sealer as the last step.
• Marble countertops: a flat rate starting at about $600. That price already includes the grinding needed to take out scratches and dull spots.
• Marble showers: priced the same way as countertops, a flat rate starting at about $600.
• Terrazzo floors: the same $4 to $5 per square foot as marble. You can learn more on our terrazzo restoration page.
• Granite: a flat rate quote after we test a small spot, because granite is harder and every surface behaves a little differently.

We also keep a few things simple. The estimate is free, the test spot is free, there is no minimum service fee and we do not ask for a deposit.

If your floor or counter only needs a shine brought back, start with our main marble polishing service in Atlanta page. It explains the full process step by step.

Why Some Quotes Look Cheaper Than Ours

You may see much lower numbers online. HomeAdvisor’s 2026 cost guide puts stone polishing and refinishing at $1 to $7 per square foot, and lists marble floor restoration as low as $1 to $3. So why do we charge $4 to $5?

The answer is what happens on the floor. A low quote often means a quick buff with polishing powder. That can make a floor look brighter for a while, but it does not remove scratches, etch marks or worn paths. The dull look tends to come back fast, and you end up paying again.

Our floor price covers real resurfacing. We start with diamond pads to grind the marble flat and remove damage. Then we move through finer and finer grits, finish with a polishing compound, and seal the stone with a professional grade sealer from Gran Quartz.

When you compare two quotes, ask one simple question: does this price start with grinding, or only with buffing? That one answer explains most of the gap.

6 Things That Raise or Lower Your Price

Two homes with the same size floor can get very different quotes. These are the things we look at when we price a job.

1. How damaged the marble is. A floor that is only dull needs fewer steps than one with deep scratches, etch rings from spills or worn walking paths. More steps means more time. Not sure what you are looking at? Our guide on why marble loses its shine helps you tell the problems apart.
2. How big the area is. Floors are priced by the square foot, so a 1,000 square foot main level costs more in total than a small bathroom.
3. What kind of surface it is. Floors are open and easy to work on. Countertops and showers have edges, corners and fixtures, which is why we price them as one flat job instead.
4. Whether you want a new finish. We can turn a shiny floor into a soft matte look, or turn a matte floor glossy. Changing the finish takes more work than bringing back the one you have.
5. Chips and cracks. Physical damage gets fixed before we polish. We price marble repair after we see it, because every chip is different.
6. Your timeline. Most of our jobs are booked about one week out. If you need it done this week, we offer emergency service at a higher price.

The Atlanta factor

Atlanta homes face two things that wear marble faster. The first is grit. Sand and red clay dust tracked in from outside act like fine sandpaper under shoes, and the Natural Stone Institute warns that sand, dirt and grit can damage natural stone floors. That is why entry halls and kitchen paths are usually the first spots we see go dull.

The second is our long, humid summers. We explain how moisture affects stone in why Atlanta’s humidity damages marble floors.

What It Costs for Common Rooms

Per square foot prices are hard to picture, so here is the simple math for common spaces in Atlanta homes. Your final number comes after we see the stone and do a free test spot.

• A small bathroom floor (about 120 sq ft): roughly $480 to $600.
• A front foyer and hallway (about 300 sq ft): roughly $1,200 to $1,500. Entries tend to dull first because every person who comes in walks across them.
• An open main floor (about 800 sq ft): roughly $3,200 to $4,000.
• A marble kitchen countertop: a flat rate starting at about $600.
• A marble shower: a flat rate starting at about $600.

To work out your own floor, multiply length by width for each room, add the rooms together, then multiply by $4 and by $5. That gives you a fair low and high number to plan around.

Worried about the mess or how long you will be out of the room? We cover that in how long professional marble polishing takes.

Polishing, Honing or Full Restoration: Which One Are You Paying For?

These words get mixed up a lot, and the mix up can cost you. Here is what each one means in plain terms.

Polishing brings back a glossy, mirror like shine. It is the right choice when the stone is in decent shape but has lost its gleam.

Honing leaves a smooth, soft matte finish with no shine. Some people choose it on purpose because it hides small scratches and etch marks better. Read more on our marble honing page, or see whether you can hone polished marble.

Full restoration is the whole package: grinding, honing, polishing and sealing. It is for stone with deep scratches, uneven tiles or years of wear. Our marble restoration and marble refinishing pages explain when you need it.

Good news for budgeting: on floors, our $4 to $5 per square foot rate already covers the grinding and polishing work. You are not paying a separate line for each step. And if light etching is your only issue, check whether etching and water stains can come out without refinishing before you book anything.

Restore or Replace? Do This Math First

If someone has told you to rip out your marble and start over, compare the numbers before you agree.

Fixr’s 2026 cost guide says new marble countertops cost about $3,500 on average for a typical kitchen with 35 square feet of counter, and anywhere from $1,750 to $7,000. That is before you deal with a torn up kitchen, plumbing hookups and waiting weeks for a new slab.

Restoring the same counter with us starts at about $600. In most cases the stone you already have is fine underneath. It just needs the damaged top layer taken off and a fresh polish.

Floors follow the same logic. HomeAdvisor lists new natural stone flooring at $6 to $20 per square foot, and that does not include ripping out the old floor. Our floor rate is $4 to $5.

Replacement does make sense in a few cases, such as a cracked slab that cannot be fixed or a remodel where you want a totally different stone. If you are unsure, we will tell you honestly after the free test spot.

Can You Polish Marble Yourself and Save Money?

For very light problems, yes. The Natural Stone Institute says slight surface scratches can be buffed by hand with very fine 0000 steel wool. A good stone cleaner and a soft cloth will also lift a lot of everyday dullness. Our guide on removing stains from marble walks through the safe home methods.

For anything deeper, a store kit will not do the job. At home polish kits cannot take out deep scratches, etch marks or uneven wear, because those need real diamond grinding equipment. Without the right tools and experience, it is easy to leave swirl marks or low spots that cost more to fix than the original problem.

A good rule: if you can feel the scratch with a fingernail, or the dull patch looks like a ring or a path, call a pro. The same Natural Stone Institute guide says deeper scratches and etch marks should be handled by a professional stone restorer.

8 Questions to Ask Before You Accept Any Quote

The cheapest price is not always the lowest cost. Ask every company these questions, including us.

1. Is the price per square foot or a flat rate? Know which one, so a small job does not turn into a surprise bill.
2. Does the work start with diamond grinding, or just buffing? This is the biggest reason prices differ.
3. Is sealing included, and which sealer do you use? A sealer helps the stone resist stains, but the Natural Stone Institute is clear that sealing does not make stone stain proof.
4. Will you test a small spot first? A test spot shows you the real result before you spend the full amount.
5. Do you carry liability insurance? Georgia does not require a state trade license for stone restoration, so insurance is one of the few ways to know a company is serious.
6. Do you need a deposit? Large deposits on small jobs are a warning sign.
7. Is there a minimum fee? Some companies charge a set minimum even for one small countertop.
8. Who actually does the work? Find out if the person who quotes you is the person who shows up, or if the job goes to a subcontractor.

How to Make the Shine Last (and Spend Less Next Time)

The cheapest polish is the one you do not need yet. These habits keep marble looking good for longer.

• Clean with the right products. Use a pH neutral stone cleaner, warm water and a soft microfiber cloth. Never use vinegar, bleach or all purpose sprays, because acids and harsh chemicals dull marble.
• Wipe spills right away. Wine, coffee and citrus juice can etch or stain marble if they sit.
• Dry the surface after cleaning. Standing water leaves spots.
• Put mats at every door. This keeps Atlanta’s grit and red clay off your floors.
• Reseal from time to time. Sealer wears down with foot traffic and daily use. Our marble sealing page explains how to tell when it is time.

Countertops wear differently than floors. See how often to polish marble countertops in Atlanta for a simple schedule. If you would rather leave the routine care to someone else, we also offer marble cleaning services.

How We Price at Georgia Marble Services

We are a small, owner run company based in Snellville, and we travel across Metro Atlanta with a focus on Buckhead and Vinings. Our owner has worked hands on in stone restoration for more than 10 years and handles every job personally. We do not use subcontractors.

Here is how working with us goes:

• Free estimate and free test spot. We polish a small area first so you see the result before you commit. There is no obligation.
• No deposit and no minimum fee. A single bathroom vanity is as welcome as a whole house.
• Insured. We carry liability insurance up to $1 million.
• Clear timing. Most jobs are booked about a week out. Same week emergency service is available at a higher rate.
• Easy payment. We accept all major payment methods.
• Commercial clients welcome. We offer monthly maintenance contracts with a service warranty for commercial VCT floors, which we strip and wax at $2 per square foot.

Ready for a real number for your home? Contact us for a free estimate, or read more about our marble floor polishing process first.

Frequently Asked Questions

How much does it cost to polish a marble floor in Atlanta?
We charge $4 to $5 per square foot for grinding and polishing a marble floor in 2026. A 300 square foot foyer and hallway would land around $1,200 to $1,500.

How much does it cost to polish a marble countertop?
Countertops are a flat rate starting at about $600. The price includes the grinding needed to remove scratches and dull spots, not just a surface buff.

Is sealing extra?
Sealing is a standard last step on every marble floor we polish. Your written estimate will list exactly what is included, so there are no surprises.

Do you charge for an estimate?
No. The estimate is free, and so is the test spot. There is no obligation to book.

Is polishing cheaper than replacing marble?
Almost always. New marble countertops average about $3,500 for a typical kitchen, while restoring a countertop with us starts at about $600.

Do you polish granite and terrazzo too?
Yes. Terrazzo floors cost the same $4 to $5 per square foot as marble. Granite gets a flat rate quote after a free test spot.

Can you come this week?
Most jobs are booked about one week out. If it cannot wait, we offer same week emergency service at a higher rate.

Does it work on cultured marble?
No. Cultured marble is a man made resin product, not natural stone, so it cannot be polished the same way. Our services are for natural marble, granite, terrazzo and VCT floors.